PLEASE NOTE! The pattern of LED's may vary slightly from that shown. These lamps are ideal if a constant light output is desirable over a range of voltages, they are also suitable for 24V systems. The LED's will also have a longer life due to a constant voltage provided by the built in regulation.
Part No.	Voltage	Size "d"	Watts	Replace	Colour	Price	P&P
LED6S	10 - 30V	24mm	1.3	10	Warm	£4.99	£1
LED8S	10 - 30V	24mm	1.4	13	Warm	£5.99	£1
LED10S	10 - 30V	30mm	2.1	15	Warm	£6.99	£1
LED15S	10 - 30V	45mm	2.2	20	Warm	£8.99	£1
LED21S	10 - 30V	43.5mm	2.8	20+	Warm	£9.99	£1

G4 CENTRE REAR PINS REGULATED
TR>

As above but with rear pins for sockets requiring vertical pins.
Part No.	Voltage	Size "d"	Watts	Replace	Colour	Price	P&P
LED8C	10 - 30V	24mm	1.4	13	Warm	£5.99	£1
LED10C	10 - 30V	30mm	2.1	15	Warm	£6.99	£1
LED15C	10 - 30V	45mm	2.2	20	Warm	£8.99	£1
LED21C	10 - 30V	43.5mm	2.8	20+	Warm	£9.99	£1

G4 CASED & MR11 SPOT CASED

These lamps are ideal where there is a possibility of components coming into contact with other conductive (metal) items. The LEDM1121 will fit a GU4 base and many G4 bases and will replace most MR11 spot bulbs.
Part No.	Voltage	Size "d"	Watts	Replace	Colour	Price	P&P
LED14S	11 - 15V	24mm	1.4	10W	Warm	£5.99	£1
LED21S	11 - 15V	30mm	1	14W	Cool	£7.99	£1
LEDM1121	11 - 15V	35mm	1.6	10W	Warm	£6.99	£2

MR11 (GU4) & MR16 (GU5.3) SPOTS

Suitable for replacement of most conventional MR11 and MR16 bulbs, however the LEDM1110 does not have a glass lens and is therefore not suitable for fittings that have metal clips that could short out on the components. NOTE LEDM1610 onwards is the MR16 GU5.3 bulb. The LEDM1618 does not have a glass front.
Part No.	Voltage	Size "d"	Watts	Replace	Colour	Price	P&P
LEDM116	10 - 30V	35mm	1.4	10	Warm	£6.49	£2
LEDM118	10 - 30V	35mm	1.4	12	Warm	£5.99	£2
LEDM1110	10 - 30V	35mm	2.2	14	Warm	£8.49	£2
LEDM1610	10 - 30V	50mm	2.2	14	Warm	£8.99	£2
LEDM1615	10 - 30V	50mm	2.5	20	Warm	£7.99	£2
LEDM1618	10 - 30V	50mm	2.7	20+	Warm	£8.99	£2

TOWER (BA9S & BA15S)

The first bulb has a Ba9s base 9mm. The second bulb has a Ba15s base (car type) 15mm.
Part No.	Voltage	Size "L"	Watts	Replace	Colour	Price	P&P
TR915	10 - 30V	38mm	1.4	5	Warm	£8.99	£1
TR1518	10 - 30V	49mm	2.5	20	Warm	£9.99	£1

FESTOON

Part No.	Voltage	Size "L"	Watts	Replace	Colour	Price	P&P
F637	10 - 30V	37mm	1.5	18	Warm	£6.99	£1
F642	10 - 30V	42mm	1.5	18	Warm	£6.99	£1

LED AWNING LAMP & OPTIONAL EXTENSION

The awning lamp is 1 metre and comes complete with 5 metres of cable 12V plug, crocodile clips and mains adapter to suit any requirement.
Part No.	Voltage	Size "L"	Watts	Replace	Colour	Price	P&P
AW1M	11 - 15V	1 M	11	75	Warm	£34.99	£3.99
AW1ME	10 - 15V	1 M	11	75	Warm	£29.99	£3.99

WE WILL COMBINE POSTAGE ON MORE THAN ONE ITEM!
Please note, all above details are for guidance only. Actual consumption will vary slightly from one lamp to another. Replacement figures are a suggestion and not a definitive comparison of light output. The actual way that light disperses from a conventional filament bulb, a Halogen bulb and an LED array are quite different. If used with lenses deflectors or diffusers, the differences are not so pronounced.

Looking directly at a Halogen 10W bulb will appear far more intense than a replacement LED bulb, the amount of light produced in a room is however comparable. This is partly due to the single light source from the halogen i.e. the filament and the multiple output from a collection of LED's. The angle of light output is also an important factor.
MORE TO FOLLOW!